Harness "Alpha 1.5", article number vnt 415

A simple safety harness with two safety points, designed to protect against falls from height. It is used when working in the support space.
The harness is made of tape with retroreflective thread, which is necessary when working in conditions of limited light and visibility.
The design of the harness ensures optimal load distribution on the leg girdles and shoulder straps at the moment of stopping the fall.
The front point requires mandatory locking, as it is made according to the A/2x2 scheme. The strap of the safety point loops is protected from abrasion by a polymer protector.
The safety point located on the back can be adjusted to the height of the user. It can be shifted vertically on the X-shaped shoulder straps to adjust the correct position.
The size of the harness is adjusted by means of 3 split buckles: two located on the leg straps and one on the chest. The chest buckle also prevents the shoulder straps from falling off the user while working.
The design has a jerk indicator.
For users whose weight together with individual equipment does not exceed 150kg.
Attention! Workers weighing between 100kg and 150kg (with equipment) should build safety systems with a jerk factor of 1 or less.