Guide bush 11,0/8,5 mm for drill bit, article no. 550.012

Instrument for fracture treatment. Used to simultaneously place, change the angle and direction of a rotating drill on hard tissue (usually bone) and protect the surrounding soft tissue while the drill is in operation. It is made of corrosion resistant stainless steel. Length - 216.5 mm. Height of the sleeve - 95 mm. The handle for holding the sleeve is offset 120 from the drill insertion axis. The outer diameter of the bushing is 11 mm and the inner diameter is 8.5 mm. Laser marking of the article on the product. Reusable.