Double-seat pupil's table

The table top and the front panel of the table are made of 16mm chipboard, or the table top is made of 26mm plastic-coated chipboard. The ends of the table top are covered with 2mm thick PVC edgebanding. The ends of the front panel are covered with 0.5mm thick PVC edgebanding. The metal frame is made of 25x25 mm square section profile with wall thickness not less than 1.2 mm and covered with powder paint resistant to chemical and mechanical influences. The free ends of the pipes are fitted with plugs made of impact-resistant polymers. The frame of the table has polymer feet to prevent damage to the floor covering. All fixing fittings on m/frames are hidden inside the pipe to extend the life of the product. Front fixing on the table top is concealed (threaded bushings and M6 bolts). Rear fixing on the table top is through-hole (furniture bolt with nut). The front panel is attached to the frame by furniture bolts with nuts. There are 2 briefcase hooks in the design. Colour coding according to height.group.