Dining table AGAT 01.06.06

The frame is welded. Cold-rolled round tube 51 mm, wall thickness 1.5 mm connects the base of the frame and the plate under the table top. The base of the frame is a sheet of hot-rolled metal 6.0mm thick, diameter 470mm. The plate under the table top is a sheet of hot-rolled metal 3.0mm thick, 300mm in diameter with four holes 7mm in diameter for fixing the table top through m6x12 screws in the futork. To the base on the side of the floor there are felt pads to compensate for unevenness and also to avoid scratching of the floor surface by the metal base of the frame. The height of the frame is 728mm. Application of polymer powder on the grounded product in an electrostatic field with subsequent curing at T - 180-200°?. The table top is made of chipboard with a coating of laminated paper or with a coating of polymer with added sand (artificial stone).