Desk for supervisor

Equipped with cable entry device. Tray for supporting cables: must be placed under the lower part of the table top, must allow to place the cables and have a metal coating Table top without roughness. No overhangs. The table shall be on metal supports and shall consist of a table top and a metal frame. The supports shall be a metal frame of triangular cross-section. The metal support shall be a closed construction. The lining elements under the table top must not be visible. The lower part of the vertical support legs shall have plastic footrests that allow to adjust the height of the support up to 50 mm. The table frame shall be rectangular single and shall ensure monolithic construction. The crossbeam shall be recessed under the table top. Fastening of the frame to the supports without visible elements. The crossbar is installed without gaps between the metal supports and with an indentation of 5-10 mm from the table top.