Cylindrical two-stage gearbox Ts2H-710-31,5-22

Cylindrical gearboxes horizontal two-stage special type Ts2-630 are used in the mechanisms of hoisting machines mining equipment, and can also be used to drive other machines in the range of ratios from 8 to 40 in repeated-short-term modes of loading, Gearboxes are designed to work in the following conditions: load constant or variable one direction or reversible; work periodic stops (repeated-short-term mode), it is allowed to work for a long time; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction; rotation of the shafts in any direction.
operation; shaft rotation in any direction; input shaft rotation frequency should not exceed 1500 rpm; atmosphere types I and II according to GOST 15150-69 with air dustiness not more than 10 mg/mS; climatic designs according to GOST 15150-69 U and T for placement categories 1, 2, 3 UHL and O for placement category 4.