Camilla" AR3-02.T8L 1.5-Single Bed with Rectangular Design for Comfort

Bed AR3 of panel construction. The width of the mattress for bed AR3 is 1200mm. The body of the bed is formed by the headboard and footboard, connected by longitudinal columns.

The centre longitudinal support is fixed in the middle of the bed. Coniferous lumber bars are fixed on the support and the boards: on the support - on both sides, on the boards - on the inner side. A flexible base is laid on the bars, which is a bent-glued laminated plate made of husked veneer.

The bent-laminated plates with plastic tips at the ends are fastened along the length of the bed with fabric tape using metal staples. Head and foot backrests of beds AR1, AR1, AR3 have decorative overlays made of MDF profiles, which are fixed with self-tapping screws, double-sided adhesive tape, screws, glue. Headboards are made of two parts: headboard support and headboard shield, connected with metal pipes, screws and screws.

The height of the headboard from the floor and the volume of the under-bed space allow to install under the bedAP3 drawer pull-out G99.