Bedside cabinet ATT-C2

The cover and the front of the cabinet: should be made of MDF 25mm thick shaped, facade 19mm, on the outer sides of the three-layer enamel coating with anti-vandal special effect colour NSC gloss not more than 10% (matte finish). ) The frame shall be made of 16mm thick chipboard. The ends of the cabinet and shelves shall be covered with 2mm thick PVC edging. The back wall shall be made of the same colour as the cabinet. The interior space is divided in half by a shelf made of 16mm chipboard. The cabinet has a plinth system on adjustable mortise feet and must include a cut-out for the wall skirting board. The cabinet is equipped with one swinging facade (sash), opening is done by means of four hinges with a system of smooth closing and adjustment in three planes. A handle is attached to the facade, the shape is a bracket with an inter-axial distance of not less than 128 mm. The cabinet should have such a design that on the external visible parts there was no visible fastening fittings.