AR4 Bed 1,5 sleeper from "Flash" furniture set

Bed AR4 of panel construction. The width of the mattress is respectively 1400 mm.
The body of the bed is formed by the headboard and footboard, connected by longitudinal columns. The centre longitudinal support is fixed in the middle of the bed. Coniferous lumber bars are fixed on the support and the boards: on the support - on both sides, on the boards - on the inner side. A flexible base is laid on the bars, which is a bent-glued laminated plate made of husked veneer. The bent-laminated plates with plastic tips at the ends are fastened along the length of the bed with fabric tape using metal staples. The body of the bed is assembled on metal corners with screws and euro screws. Longitudinal bars made of softwood lumber are fastened to the longitudinal boards and the centre support with screws and glue. The height of the king rail and the volume of the under-bed space allow the installation of a drawer G86 or G99.