Possibility to connect external batteries
yes
Possibility to connect external batteries
available
Uninterruptible power supply form factor
1U
Number of battery-assisted power output connectors
3 pcs
Type of batteries used
any maintenance-free batteries with capacity up to 100 Ah
Presence of terminal output
available
Parallel operation function
available
Earthquake-proof design
no
Uninterruptible power supply efficiency
Flat grinder, Specialised grinder %
Minimum permissible nominal voltage of batteries
44 V
Maximum permissible nominal voltage of rechargeable batteries
55 V
Minimum ambient temperature
3 °C
Maximum ambient temperature
40 °C
Maximum ambient relative humidity
80 %
Communication interface
Ethernet
Number of battery rooms
4 pcs
Number of batteries in one battery cabinet
4 pcs
Capacity of one battery
100
Number of power output connectors without battery support
3 pcs
Lower limit of input voltage range (phase-to-neutral) without switching to battery operation mode
11.8 V
Upper limit of input voltage range (phase-to-neutral) without switching to battery operation mode
13.8 V
Charger power at rated load power relative to the rating of the uninterruptible power supply, not less than
95 %
Physical dimensions of uninterruptible power supply height when installed in a telecommunication rack, U
1
UPS management and monitoring
SNMP protocol
Availability of a network card as part of the uninterruptible power supply unit
Available
Uninterruptible power supply protection against water leakage from above
Нет
Uninterruptible power supply protection against dust
Корпус
Space for uninterruptible power supply maintenance
two-sided service
Integrated N+1 redundancy (module level) for modular uninterruptible power supplies
1+1
Passive overcharge protection built into the battery cells when using lithium-ion batteries
with BAKB module
Availability of advanced monitoring when using modular batteries
no
Supports plug-n-play technology when using modular batteries
no
Uninterruptible power supply phase (input:output)
single-phase
Input connection
IEC 60320 C13 (M)
Output connection
to screw
Nominal input voltage
220 V
Rated output voltage
48 V
Nominal input frequency
SBVVBG
Type of battery cabinet design
any
Modular uninterruptible power supply battery architecture
no
Battery parameters measured by the monitoring system
current, voltage, temperature, failure, shelf life
Charging mobile devices via USB bus
no
Redundancy in parallel operation
yes
Number of uninterruptible power supplies in the system in case of parallel connection
2 pcs
Availability of high energy efficiency mode
no
Charging batteries in high energy efficiency mode
no
Interference correction in high power efficiency mode
no
Zero (0ms) switching time from high energy efficiency mode
no
Uninterruptible power supply load self-test mode with no load connected
yes
Power supply voltage
220 V
Minimum battery life at full load
280
Number of power output connectors
3 pcs
Availability of cold start
yes
The first characteristic digit of the degree of protection designation, not less than
20
Parallel operation function
yes
Earthquake-proof design
no
Maximum load current
15 A
Rated output voltage
48 V