محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
Floor Distribution Panels Series SH, Height 481mm to 1120mm, Width 336mm to 945mm, Depth 12mm to 950mm, IP31 Protection
﷼ 378,000-1,764,000
Continent ETS LLC 🇷🇺
بدنههای تابلوهای توزیع سری ش.ک.ن، ارتفاع از ۳۷۰ میلیمتر تا ۶۳۰ میلیمتر، عرض از ۲۵۶ میلیمتر تا ۳۳۶ میلیمتر، درجه حفاظت
﷼ 378,000-1,512,000
Continent ETS LLC 🇷🇺
بدنههای تابلوهای توزیع سری ЩУНС، ارتفاع از 370 میلیمتر تا 500 میلیمتر، عرض از 250 میلیمتر تا 310 میلیمتر، درجه حفاظت IP54،
﷼ 630,000-2,520,000
Continent ETS LLC 🇷🇺
بدنه دستگاههای ورودی و توزیع برق VRU، ارتفاع 1700mm، عرض 800mm، عمق 450mm، نوع آب و هوایی UHL 4، با
﷼ 37,800,000-126,000,000
Continent ETS LLC 🇷🇺
بدنه های تابلو با پنل نصب شده ЩМП، ارتفاع از ۲۵۰ میلیمتر تا ۱۷۰۰ میلیمتر، عرض از ۲۱۰ میلیمتر تا ۷۰۰ میلیمتر، عمق از ۱۰۰ میلیمتر تا ۴۰۰ میلیمتر.
﷼ 630,000-7,560,000
Continent ETS LLC 🇷🇺
Wall-Mounted Distribution Boards with Solid Metal Door, Series ЩРН
﷼ 630,000-2,520,000
Continent ETS LLC 🇷🇺
RS52 Series Linear Cabinet Enclosures from 1200mm to 2200mm High
﷼ 8,820,000-75,600,000
Continent ETS LLC 🇷🇺
Terminal Boxes Series TB 100mm to 400mm Height, 100mm to 800mm Width
﷼ 378,000-2,520,000
Continent ETS LLC 🇷🇺
بدنه سری UC2M ارتفاع از 300 میلیمتر تا 1400 میلیمتر، عرض از 300 میلیمتر تا 800 میلیمتر، عمق از 150 میلیمتر تا 400 میلیمتر. نوع آب و هوایی
﷼ 630,000-7,560,000
Continent ETS LLC 🇷🇺
UC2 Series Enclosures for Electrical Distribution, Height 300-1400mm
﷼ 630,000-7,560,000
Continent ETS LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
در زمان خود صرفهجویی کنید
تابلوهای توکار با درب فلزی یکپارچه سری ЩРВ، ابعاد ارتفاع از ۲۵۲ میلیمتر تا ۵۱۸ میلیمتر، عرض از ۲۶۸ میلیمتر تا ۴۲۵ میلیمتر،
﷼ 378,000-2,016,000
Continent ETS LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.