Barrier consists of two side supports made of LDF. Between them they are fastened with a stainless steel clad LDPE table top.
The edges of the metal sheet are bent and pass into the plane of the table top ends.
The worktop is made by gluing two chipboard boards together with contact glue.
A rounded hole is made in it.
The side supports are fastened with a recessed front panel made of chipboard.
The lower part of the front panel is a plinth lined with brushed stainless steel. The front panel is fixed to the side supports and the table top by means of screws (screw 8) on PVA glue or equivalent eccentric screws.
One pull-out drawer made of fibreboard is provided on the rear side of the barrier. Use guides on both sides.
The drawer has a rectangular shaped metal handle with a square cross-section.
Under the worktop and above the pull-out drawer, a shelf made of light fibreboard is mounted.
The edges for the chipboard are made of PVC.
Tell us what you need and get quotes from verified suppliers