Maximum value of measured vibration acceleration, RMS
200 م/ث²
Operating frequency range of measured vibration acceleration (frequency response non-uniformity ± 10 %)
تردد القطع 2,3,5,10,30 هرتز (قابل للتعديل من قبل المستخدم)
Maximum value of measured vibration velocity, RMS
200 مم/ث
Maximum value of measured vibration displacement span, RMS
1000 ميكرون
Input/output connectors
كتل طرفية لولبية
Measurement error in the operating temperature range
±2 %
Types of connected vibration transducers
IEPE
Data exchange in the information system
RS485
Sensor supply voltage
IEPE 24 + 2 فولت
IEPE sensor supply current (±10 %)
5.7 مللي أمبير
Consumption current (terminal blocks)
4 ... 20 مللي أمبير
Supply Voltage (BNC)
± 5 فولت (إشارة)
Dry contacts: for monitoring the measured parameter
AL1, AL2, AL3
Step of setting the thresholds
0.1 (1) مم/ثانية
Conditions of signalling (closed or open) of relay contacts "AL1", "AL2", "AL3"
تجاوز مستمر للإشارة الإعلامية للقيمة الحدية المحددة لمدة 0-9 ثوانٍ
Mode of operation of relay contacts
حظر/استعادة ذاتية
Self-recovery condition
خفض الاهتزاز بنسبة 6% من عتبة التشغيل
Delay of vibration control after establishing operation mode/self-recovery
0 أو 20
Dry contact parameters
معلمات "الاتصال الجاف" <1 أمبير
Differential synchronisation line
نعم
Information displayed on the built-in display
المعلمة المقاسة، معامل تحويل المستشعر، قيم العتبة المحددة، رموز الأخطاء عند انقطاع الكابل وفشل المستشعر، إعداد وقت تجاوز العتبات
Consumption current
< 200 مللي أمبير
Supply voltage (±10 %)
18...30 فولت
Operating temperature range
-40...70 °م
Step of setting the time of exceeding the vibration velocity threshold values
1