
الشركة المصنعة:
السعر:
طلب عرض سعر
أسعار الجملة متاحة
شروط FOB و CIF و EXW متاحة
النقاط الرئيسية
- صنع في روسيا - مصمم للمتانة
- مناسب للبيئات الصعبة
- تكلفة ملكية أقل من البدائل الأوروبية
- طلبات الجملة متاحة مع خصومات على الكمية
- المساعدة في التوثيق والتخليص الجمركي مقدمة
الوصف
هذا fire alarm detectors مصنوع في روسيا ومتاح للاستيراد إلى الأسواق العالمية. المنتجات الروسية معروفة بمتانتها وموثوقيتها ونسبة السعر إلى الأداء الممتازة.
للحصول على مواصفات المنتج التفصيلية، يرجى الاطلاع على علامة تبويب المواصفات. اتصل بفريقنا لطلب معلومات الأسعار والتوافر والشحن.
المواصفات
Degree of protection of the shell according to GOST 14254, IP
65
Weight of the reduced reflector-reflector, not more than
0.07 kg
Weight of a standard reflector-reflector, not more than
0.45 kg
Weight of the transceiver, not more than
0.42 kg
Inertia of "Fault" notification fixation in the "Fault - Reduction" mode
40...60
Inertia of "Fault" notification fixation in the "Fault - excess" mode
40...60
Inertia of "Fault" notification fixation in the "Fault - Beam" mode
6.5...7.5
Inertia of "Fault" notification fixation in the "Fault - tolerance" mode
3...5
Inertia of "Fault" notification fixation in the "Fault - memory" mode
3...5
Typical inertia of detector operation (for "Attention" and "Fire" signals)
5
Maximum inertia of detector actuation (by signals "Attention" and "Fire")
10
Minimum required duration of power failure to ensure resetting of recorded notifications
2
Minimum permissible power interruption interval frequency
4
Maximum possible duration of interruptions or polarity reversals of the supply voltage that do not affect normal operation
100
Current surge value at formation of the output signal "Attention"
0.00675...0.00825 A
Current consumed by the detector in the "Fault" signaling mode, not more than
0.001 A
Current consumed by the detector in the "Fire" signal generation mode, not more than
0.025 A
Current consumed by the detector in the "Attention" signaling mode, max.
0.01 A
Current consumed by the detector in the "Normal" mode,not more than
0.001 A
Detector supply voltage
10...30 V
Maximum possible room area protected by one detector
900
Maximum possible width of the space to be protected by one detector
9 m
Range of possible distances between the transceiver and the reflector-reflector
8...100 m
ملاحظة: جميع المواصفات مقدمة من الشركة المصنعة وقد تخضع للتغيير. يرجى الاتصال بنا لتأكيد أحدث المواصفات قبل تقديم طلبك.
شارك متطلباتك للحصول على رد سريع!
رد فوري خلال 15 دقيقة
أفضل أسعار الجملة مضمونة
مباشرة من الشركة المصنعة
التسليم والدفع
شروط الشحن
وقت التسليم
الشحن البحري: 30-60 يوم (حسب الوجهة)
الشحن الجوي: 14-21 يوم (للطلبات العاجلة)
طرق الدفع
منتجات مماثلة قد تهمك

Fire thermal detector explosion-proof IP 101-201.6-A3-AZIMUT MK
عرض التفاصيل
Spectron-535-Exd-A-UDP-01 remote starter device
عرض التفاصيل
Fire thermal detector general industrial programmable IP101-07a-RS-O
عرض التفاصيل
Switching module MK-4 "RUBETEK"
عرض التفاصيل
Spectron-804-N-Modbus fire flame detector
عرض التفاصيل
Reflector for IPDL-D-I/4p
عرض التفاصيل
Fire flame detector explosion-proof IPP-07e-329/330-1 ("Helios")
عرض التفاصيل
Fire smoke detector optical-electronic addressable analogue IP 212-64-R3
عرض التفاصيل
?2000-????????-607-Exd-?
عرض التفاصيل
Addressable analogue flame detector TULPAN 64/2-R3, IP 329/330-64/10-1
عرض التفاصيل
Spectron-901-Exd-M-HART fire flame detector
عرض التفاصيل
?2000-????????-607-Exi
عرض التفاصيلموردون موثوقون
جميع المنتجات يتم الحصول عليها مباشرة من المصنعين الروس المعتمدين
ضمان الجودة
المنتجات تلبي معايير الجودة الدولية مع الشهادات المناسبة
الشحن العالمي
حلول لوجستية موثوقة لتوصيل المنتجات إلى موقعك
مدفوعات آمنة
خيارات دفع آمنة متعددة لتسهيل المعاملات الدولية