كابلات طاقة منخفضة الجهد (حتى 1 ك.ف)
كابلات متوسطة الجهد (6-35 ك.ف)
أسلاك مبانٍ وسكنية
كابلات ألمنيوم منخفضة الجهد (حتى 1 ك.ف)
كابلات اتصالات وإشارات وشبكات منظمة
كابلات نحاسية منخفضة الجهد (حتى 1 ك.ف)
كابلات تحكم
كابلات تركيب
وصلات كابلات ونهايات
موصلات معزولة ذاتية الحمل لخطوط هوائية
تجهيزات ومشابك كابلات وأسلاك
كابلات بحرية ونفط وغاز ومناجم
إكسسوارات كابلات (أطراف وأكمام وعلامات)
كابلات ألياف بصرية
أسلاك وأطوال إطالة
منتجات كابلات أخرى
قضبان توصيل نحاسية وألمنيوم
كابلات حرارية ومزدوجات حرارية
أسلاك تركيب
موصلات مكشوفة لخطوط هوائية
أسلاك مغناطيسية ومطلية
كابلات وأسلاك أخرى
المنتجات — الكابلات والأسلاك
كابل توصيل خفيف الوزن للطائرات للاستخدام في التيار المتردد / المستمر
SAR 3.38-22.50
ش.ذ.م.م كامسكي الكابلات 🇷🇺
سلك تركيب معزول بأسلاك عالية القوة للاستخدام بجهد 250 فولت
SAR 3.38-22.50
ش.ذ.م.م كامسكي الكابلات 🇷🇺
كابل طاقة مرن حتى 1 كيلو فولت مع موصلات نحاسية ELKAFLEX SERVO KGNng(A)
SAR 3.38-13.50
ش.ذ.م.م مؤسسة إلكا-كابيل 🇷🇺
سلك بورد محمي للاستخدام في الطائرات، 250 فولت تيار متردد / 350 فولت تيار مستمر
SAR 5.63-67.50
ش.ذ.م.م كامسكي الكابلات 🇷🇺
كابل طاقة مرن حتى 1 كيلو فولت - ELKAFLEX KGH-XL O1.8.2.5.4
SAR 3.38-13.50
ش.ذ.م.م مؤسسة إلكا-كابيل 🇷🇺
كابلات الطيران منخفضة الجهد (نوع BK) - DKYUG.358300.014TU
SAR 3.38-22.50
ش.م مكتب التصميم التجريبي ك.پ 🇷🇺
أسلاك منخفضة الجهد على متن الطائرة (نوع BS) - DKYUG.358300.015TU
SAR 3.38-22.50
ش.م مكتب التصميم التجريبي ك.پ 🇷🇺
غطاء تخفيض صينية الكابل المركزية KLZ 000x00 C - مقاسات من 300x200 مم إلى 1000x800 مم
SAR 33.75-450
ش.م مصنع سز إمي 🇷🇺
سلك مطلي بالمينا مقاوم للحرارة PETV-2، النوع 2، 0.063 مم - 2.50 مم
SAR 1.13-9
ش.ذ.م.م بسكوف للكابلات 🇷🇺
كابل طاقة مرن مع الألمنيوم ذو الحبيبات الدقيقة، نموذج AsKGN-XHL
SAR 3.38-13.50
ش.ذ.م.م مؤسسة إلكا-كابيل 🇷🇺
سلك طيران عالي الجودة مع عزل بوليميد-فلوروبلاستيك حتى 250 فولت
SAR 3.38-22.50
ش.ذ.م.م كامسكي الكابلات 🇷🇺
أسلاك كهربائية منخفضة الجهد (نوع BS) - OKB КП TU 16.K76-235-2009
SAR 3.38-22.50
ش.م مكتب التصميم التجريبي ك.پ 🇷🇺
الأسئلة الشائعة
•How do Russian cable types correspond to IEC designations?
Construction principles match: VVG corresponds to copper PVC-insulated power cable of the IEC 60502-1 type, AVBbShv to armoured aluminium cable, and SIP to aerial bundled conductor. Cross-sections follow the same square-millimetre series. Suppliers issue comparison sheets and full construction drawings so your engineers can approve equivalence against project specifications.
•What is the minimum order — can I buy less than a full drum?
The drum is the practical unit: cutting opens a factory length and most plants avoid it for small remnants. However, plants will wind custom lengths to order — say, 12 drums of 350 metres to match your feeder runs — which is more useful than buying standard lengths and generating offcuts. Project lots start around 5–10 km total.
•Are fire-rated and halogen-free executions available?
Yes. Most power and control families come in low-smoke halogen-free (ng-LS, ng-HF) and fire-resistant (FR) executions, tested for flame spread, smoke density and circuit integrity under fire. State the fire performance class your code requires and the plant will match it and attach the corresponding test protocols.
•What documentation supports a utility tender submission?
Plants provide type test protocols, routine test certificates per drum, EAC conformity declarations, construction drawings and ISO 9001 factory certification. For medium voltage cable, partial discharge and voltage test records are included. This package normally satisfies tender technical files; specific national homologation, where required, is discussed case by case.
•How is cable shipped and how long does it take?
Drums load into containers or open wagons; a 40-foot container carries roughly 15–25 tonnes of cable depending on drum sizes. Production of non-stock positions takes 2–5 weeks. Trucking to Central Asia adds 7–14 days; sea freight from Novorossiysk or St. Petersburg to the Gulf or East Africa runs 25–45 days.
•Can conductors be supplied in aluminium to cut project cost?
Yes, and this is a major lever: aluminium low voltage cable, with 531 listings here, prices well below copper for distribution feeders where the larger cross-section is acceptable. Suppliers will recalculate your copper schedule into aluminium equivalents, showing the cross-section conversion and the cost difference per kilometre, so you can decide line by line.