خزائن جدارية ومدمجة
خزائن معدنية
علب توصيل وتوزيع
حمالات ومشابك وتثبيت
لوحات توزيع بلاستيكية
خزائن لوحات توزيع رئيسية MDB
علب أطراف وتوصيلات
لوحات عدادات وتوزيع طوابق
إكسسوارات لوحات (ألواح وأطر وقضبان)
علب كابلات وتوزيع خارجية
قضبان توزيع تيار
عوازل ومثبتات
إكسسوارات حوامل كابلات
منظمات كابلات وقنوات
خزائن وصل صغيرة
أغطية حوامل كابلات وإكسسوارات
حوامل كابلات سلمية
حوامل كابلات مستقيمة (مثقبة ومصمتة)
وصلات وزوايا حوامل كابلات
زوايا ومنحنيات حوامل كابلات
بروفايلات وقضبان DIN
خزائن وتركيبات أخرى
المنتجات — الحاويات والتركيب
مجموعة الاتصال القابلة للتعديل لصواني الكابلات LESTA h=80 مم HDZ IEK CLM40D-KSR-080-HDZ
SAR 5.63-18
ش.ذ.م.م إيك القابضة 🇷🇺
سلة كابلات ذاتية الدعم KTI 00x00، أحجام من 150x100x3000 مم إلى 1000x175x9000 مم
SAR 56.25-675
ش.م مصنع سز إمي 🇷🇺
لوتوك كابلات LESTA 100x500x6000 مم، 1.5 مم HDZ، نموذج CLM40-100-500-6-150
SAR 33.75-112.50
ش.ذ.م.م إيك القابضة 🇷🇺
سلة كابلات ذاتية الدعم KTI 00x00، أبعاد من 150x100x3000 مم إلى 1000x175x9000 مم، سمك المعدن 1.5 مم
SAR 56.25-675
ش.م مصنع سز إمي 🇷🇺
غطاء نهاية لصينية الكابلات ذات الدعم الذاتي KTI 00x00 Z، بأحجام من 150x100 مم إلى 1000x175 مم
SAR 11.25-112.50
ش.م مصنع سز إمي 🇷🇺
انحناء سلكي LESTA بزاوية 90 درجة CPG04-4-90-080-400 80x400 مم R300
SAR 33.75-112.50
ش.ذ.م.م إيك القابضة 🇷🇺
لستة انحناءة كابل 45 درجة 100x500mm R600 HDZ CPG05-4-45-100-500-HDZ
SAR 33.75-112.50
ش.ذ.م.م إيك القابضة 🇷🇺
حوض كابل معدني LESTA 80x500x3000 مم، موديل CLM40-080-500-3-120
SAR 33.75-112.50
ش.ذ.م.م إيك القابضة 🇷🇺
لوحة توصيل قابلة للتعديل لمسار الكابلات h=100 مم HDZ IEK CLM40D-PSR-100-HDZ
SAR 1.13-6.75
ش.ذ.م.م إيك القابضة 🇷🇺
مجموعة الوصلات القابلة للتعديل لتراتيب الكابلات LESTA h=100مم CLM40D-KSR-100-HDZ
SAR 5.63-18
ش.ذ.م.م إيك القابضة 🇷🇺
الأسئلة الشائعة
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.