المنتجات — معدات الحماية الشخصية
قناع نصف مرشح لحماية من الهباء الجوي مع صمام زفير "NRZ-0211" (FFP1 NR D)
SAR 0.56-2.25
ش.ذ.م.م نررزا 🇷🇺
خوذة الأمان RFI-3 BIOT® ZEN® صفراء، المادة 72315
SAR 33.75-112.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
جهاز التنفس للهروب من الحريق، مجموعة حماية الغاز والدخان زيوس 15U
SAR 33.75-135
ش.م مصنع إخمز إيم ن.د. زيلينسكي 🇷🇺
نظارات حماية مفتوحة O11 جوبيتر سبيس (5-3,1 PC) 11172S
SAR 6.75-36
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
درع لحام مع تثبيت على الخوذة PRESIDENT CRYSTALINE® PROFI، رقم 05565
SAR 56.25-180
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
خوذة حماية SOMZ-55 Hammer ZEN® سوداء، رقم 77320
SAR 33.75-112.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
قناع نصف فلتر لحماية من الهباء "ريسبيراتور سبيرو-202" FFP2 NR D
SAR 0.56-2.25
ش.م مصنع كيمرسكايا إيم. غوركوفا 🇷🇺
خوذة الأمان COMZ-55 Hammer RAPID صفراء، رقم القطعة 777715
SAR 33.75-112.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
درع وجه واقي لحام BIOT NH75 E684، رقم 57515
SAR 56.25-180
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
خوذة واقية خضراء سОМЗ-55 Favori®T RAPID موديل 75719/С
SAR 18-67.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
قبعات تحت الخوذة للرجال المعزولة لحماية من التلوث الصناعي، نموذج م-271/4U
SAR 4.50-22.50
ش.م ليغبرومريسورس 🇷🇺
بدلات نسائية للحماية من مخاطر الوميض الكهربائي "طاقة" كفو-1
SAR 337.50-1,125
ش.ذ.م.م مركز الملابس الخاصة 🇷🇺
بدلة عازلة قابلة لإعادة الاستخدام غير معقمة SIMPATIKA 1M-01/1M-02/1M-03
SAR 11.25-67.50
ش.ذ.م.م فيرما سيمباتيكا 🇷🇺
خوذة واقية RFI-7 TITAN ZEN® زرقاء، المادة 71318
SAR 33.75-112.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
درع الوجه الواقي NBT1 VISION كلاسيك TITAN، المادة 414290
SAR 11.25-67.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
درع الوجه لحماية اللحام NH-7 PREMIER Favori®T2، مادة 50764
SAR 33.75-112.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
نظارات واقية مفتوحة O28 بوبيديت سوبر، المقال 12830-5
SAR 3.38-13.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
أغطية بلاستيكية خاصة لحماية من التلوث الإشعاعي - تشيخلي-ن
SAR 11.25-67.50
ش.م مصنع كيمرسكايا إيم. غوركوفا 🇷🇺
نظارات واقية مفتوحة فيزيون سوبر O45، مقال 14562
SAR 5.63-22.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
نظارات واقية مغلقة ZP8 إيتالون سوبر، المادة 30807
SAR 3.38-13.50
ش.م مصنع سوكسونسك للأجهزة البصرية والميكانيكية 🇷🇺
مجموعة الملابس الطبية العازلة غير المعقمة القابلة لإعادة الاستخدام - الخيار 1 (بدلة، حذاء عالي، قناع)
SAR 5.63-22.50
ش.م بلوك 🇷🇺
الأسئلة الشائعة
•How do Russian respirator filtration classes map to FFP and N-series ratings?
Russian filtering half masks are tested under TR CU 019 using methods aligned with European EN 149; protection classes correspond to the FFP1/FFP2/FFP3 logic, and documentation states penetration and breathing-resistance figures you can compare directly. If your tender specifies EN 149 or NIOSH wording explicitly, ask the factory which models carry additional international certificates.
•Can workwear be adapted for hot climates and our corporate identity?
Yes — factories routinely produce lightweight breathable variants of standard workwear lines for hot regions, and customization covers your corporate colors, logos, reflective tape layout and local size charts. Sampling takes 2–4 weeks. Minimums for customized garments typically start around 100–300 sets per model; stock designs ship without minimum adaptation runs.
•What does a typical first order look like for a PPE distributor?
A common pattern: a trial carton order across 10–20 SKUs by air or parcel service, then a mixed pallet or part-container combining respirators, glasses, helmets and gloves from one or two factories. A 20-foot container of mixed PPE typically covers a regional distributor's quarter. Suppliers consolidate shipments and prepare unified export documents.
•Are shelf lives a concern for respirators and dielectric gear?
Filtering respirators and gas-mask filters typically carry 3–5 year shelf lives from production date — confirm remaining shelf life in the contract so you receive fresh stock. Dielectric gloves and boots require periodic electrical retesting per their manuals once in service. Helmets and glasses have service-life guidance printed in their passports.
•How are batch quality and consistency controlled for repeat orders?
Each production batch carries test protocols — filtration efficiency for respirators, impact tests for helmets and eyewear, seam strength for garments. For ongoing supply, agree a sampling inspection plan: factories accept third-party inspection (SGS-type) before shipment at buyer expense, which is the standard reassurance mechanism for distributors building a brand on these products.
•What are realistic production lead times at container scale?
Stock items ship within 1–2 weeks. Production runs of standard models typically need 25–45 days at container volume; customized workwear adds sampling time upfront. Sea freight to the Gulf or East Africa adds 4–7 weeks from Novorossiysk; Central Asian buyers receive trucks overland in 1–3 weeks, which suits replenishment cycles well.