产品 — 无纺布
Shelter® LUX Non-Woven Thermal Bonded Fabric - Lightweight Insulation
¥6.48-25.92
FNM "VES MIR" LLC 🇷🇺
KeepTek UN Universal Thermally Bonded Non-Woven Sound Absorption Fabric
¥21.60-216
FNM "VES MIR" LLC 🇷🇺
Non-Woven Thermal Bonded Technical Upholstery Fabric Periotek® Hollo
¥6.48-25.92
FNM "VES MIR" LLC 🇷🇺
发布您的采购需求
从认证供应商获取报价
节省时间
Thermally Bonded Non-Woven Fabric Thermoloft® Lux (Density up to 150g/m²)
¥4.32-25.92
FNM "VES MIR" LLC 🇷🇺
Thermally Bonded Non-Woven Fabric Thermoloft® Lite (Max 150 g/m2 Density)
¥6.48-25.92
FNM "VES MIR" LLC 🇷🇺
Shelter® B Comfort Multi-layer Non-woven Fabric for Footwear Insulation
¥6.48-25.92
FNM "VES MIR" LLC 🇷🇺
Shelter® B Non-Woven Multi-Layer Fabric TМP2 for Footwear Insulation
¥6.48-25.92
FNM "VES MIR" LLC 🇷🇺
最受欢迎
在 无纺布
35+ 产品
1
2
3
Shelter® Profi ST Non-Woven Thermal Bonded Fabric (Density < 150 g/m²)
¥4.32-25.92
FNM "VES MIR" LLC 🇷🇺
Shelter® Optimum Non-Woven Thermally Bonded Fabric (density <150 g/m²)
¥2.16-12.96
FNM "VES MIR" LLC 🇷🇺
常见问题
•What densities of spunbond are available and how do I choose?
Producers run the typical range from 15-17 g/m2 for light crop covers up to 100-150 g/m2 for packaging and furniture applications. Choose by function: lightweight grades for frost protection and row covers, 40-60 g/m2 for bags and disposable products, heavier grades for upholstery backing. State your application and the producer will recommend a grade and send rolls for trial.
•Is agricultural spunbond stabilized against sunlight?
Agro grades are normally UV-stabilized for one or more growing seasons, and the producer declares the stabilization level. For high-radiation climates in the Gulf or Africa, ask specifically for the seasonal lifetime under your conditions rather than relying on the standard rating, and consider the heavier-stabilized grades. Field behavior should be confirmed with a trial batch.
•How is wadding shipped without paying for air?
Thermal wadding and sintepon are compressed into bales or vacuum-packed rolls, which cuts shipped volume several-fold; the material recovers its loft after unpacking. Confirm the compression ratio and recovered thickness with the producer, since this determines how many tons fit a container. Loading plans and bale dimensions are provided with the quotation.
•Can geotextile from this section be used in road projects with engineering supervision?
Yes, producers supply needle-punched geotextile with declared tensile strength, elongation and density measured under Russian standards, and provide test reports with each batch. If your project engineer specifies parameters under ISO or ASTM methods, request the producer's comparative data or arrange third-party testing of delivery samples - both are routine for export contracts.
•What are realistic minimums and lead times for a first order?
Producers typically sell from about one ton per article for stocked grades; custom widths or colors start around 3-5 tons. Production lead time is short, usually 10-20 days, because lines run continuously. Transit adds 10-18 days overland to Central Asia or 30-45 days by sea to most other regions.