产品 — 变速箱与传动
Front Axle Housing for UAZ Profi, Spicer, 1600mm Track, 4.25 Ratio, Disc Brakes
¥1,512-4,320
UAZ LLC 🇷🇺
Rear Differential for UAZ Hunter, Timken Bridge, Gear Ratio 4.625, Model 374100240301010
¥648-2,160
UAZ LLC 🇷🇺
Rear Axle for UAZ Pickup 4.111 Ratio, ZMZ 40905 Engine, No ABS, Stabilizer Brackets
¥3,024-8,640
UAZ LLC 🇷🇺
Rear Axle for UAZ Vehicles, Timken, 1445 mm Track Width, Ratio 4.625, Code 04
¥3,024-10,800
UAZ LLC 🇷🇺
Gearbox Repair Kit for GAZEL and VOLGA 5-Speed Transmission 310290170180500
¥64.80-259.20
UAZ LLC 🇷🇺
Rear Axle for UAZ Vehicles, Timken, 1445 mm Track Width, Ratio 4.625, Code 27
¥3,024-10,800
UAZ LLC 🇷🇺
Transfer Case for UAZ Hunter Vehicle, i=4.625, 1000 RPM, BAIC Model 316200180012010
¥1,512-4,320
UAZ LLC 🇷🇺
5-Speed Transmission with Transfer Case and Parking Brake for UAZ Hunter, ZMZ 409, i=4.11, Dymos
¥4,320-12,960
UAZ LLC 🇷🇺
Rear axle for UAZ vehicles, Timken, 1465 mm track width, 4.625 ratio, ABS, code 43
¥2,592-8,640
UAZ LLC 🇷🇺
Transfer Case for UAZ Profi (ZMZ 409051, 52, i=1/1.94, i=4.625, 1000 rpm, Dymos) 316310180012100
¥2,592-8,640
UAZ LLC 🇷🇺
常见问题
•Is it cheaper overall to import complete axles or rebuild locally with parts?
It depends on your labor cost and workshop skill. Complete assemblies cost more in freight and purchase price but eliminate rebuild labor, special tools and the risk of bad adjustment — decisive for fleets where vehicle downtime is expensive. Parts-level repair wins where labor is cheap and skilled. Many distributors stock both and let workshops choose.
•Are transfer cases and gearboxes tested before export shipment?
Factory-assembled units are bench-tested as part of production and ship with a passport recording serial number and acceptance. They arrive oil-drained or with preservation fluid — check the documentation and fill to specification before installation. Keep the passport: warranty claims on assemblies are processed against the serial number and proof of correct commissioning.
•Can I match a clutch kit if I only know the engine, not the part numbers?
Usually yes. Engine model plus vehicle modification identifies the clutch in the factory application tables — for example the diameter and spline count differ between engine families but are fixed within them. Send engine designation, year and gearbox type; the supplier returns the kit number. A photo of the old disc hub resolves ambiguous cases.
•Do driveshafts arrive balanced, and what about custom lengths?
Catalogue driveshafts are dynamically balanced at the factory and marked accordingly. Several plants also produce shafts to custom length for bus bodies, drilling rigs and special machinery — send the flange types, length between centers and operating speed. Balancing matters more at highway speeds, so do not economize on it for road vehicles.
•What warranty and claims process applies to complete drivetrain assemblies?
Typical export contracts warrant assemblies for a stated period or mileage against manufacturing defects, conditional on documented correct installation and lubrication. Claims run on the unit's serial number with photos and a description of failure circumstances; factories may request the failed unit or parts returned for analysis. Read the warranty clause before signing — terms vary between plants.