Overall dimensions, mm
96x96x103 mm (with rear cover), 96x96x75.6 mm (without cover)
Input signal
60 mV, 75 mV, 100 mV, 150 mV, 200 mV, 250 mV, 500 mV, 1000 mV, 2000 mV; 1 V, 2 V, 5 V, 10 V, 2…10 V, 20 V, 50 V, 100 V, 150 V, 200 V, 250 V, 300 V, 500 V, 750 V; 1 mA, 2 mA, 5 mA, 10 mA, 20 mA, 4…20 mA, 50 mA, 100 mA, 200 mA, 500 mA, 1000 mA, 2000 mA; 1 A,
Basic error
по току и напряжению: ±0,1 %, ±0,2 %; по аналоговому выходу: ±0,5 %
LED indication
1 block of seven-segment indicators for displaying measured signal values by measuring channel; single LED indicators showing interface operation, state of discrete outputs, highlighting the unit of measurement; height z
Range of readings
from -19999 to +19999; from -9999 to +9999 (interface-less version)
Registering the maximum measured value
yes
Galvanic isolation of input and output circuits, power supply circuits
yes
RS485 communication interface
Quantity: 0, 1, 2; Modbus RTU protocols; Interface baud rate: 4800, 9600, 19200, 38400, 57600, 115200 bps.
Analog outputs
quantity: 0, 1, 2; ranges: 0...5 mA, 4...20 mA, 0...20 mA, 0...2.5...5 mA, 4...12...20 mA, 0...10...20 mA
Discrete outputs
Quantity: 0, 1, 2 Constant voltage 350 V, 200 mA or AC voltage 250 V, 200 mA
Power supply voltage
5 Vn – (5 + 4/-0.5) V DC; 12 Vn – (12 + 6/-3) V DC; 24 Vn – (24 + 12/-6) V DC; 220 VU - from 85 to 305 V AC at 50 Hz or from 100 to 430 V DC; 230 V - from 85 to 305 V AC at
Power consumption from the power supply circuit, not more
3.0 VA (for devices 5V, 12V, 24V); 4.0 VA (for devices without RS485 220V, 230V); 5.0 (for devices 220V, 230V)
reprogramming
via 'Configurator' program (RS485 interface) or using front panel buttons (if available)
Operating temperature range
From -40 to +70 °C (relative humidity 98% at +35 °C)
Degree of protection
IP54
Inspection interval
10 years
versions
general industrial; for use at nuclear power plants (safety class - 4 according to NP-001-2015)
Warranty period of operation
60 months
Average service life, at least
minimum 20 years