Intramedullary Osteosynthesis Impactor-Extractor for Tibia, Model 500.005

Instrument for intramedullary osteosynthesis of the tibia. It is used for the insertion of pins. It is made of corrosion-resistant stainless steel.

The total length is 250 mm. In the middle part there is a narrowing to a rectangular profile with a thickness of 6 mm for a slotted hammer. At the end of the working part there is an anvil for a 20 mm diameter hammer.

On the other side there is a tapered surface with M101 internal thread for a grub screw. Laser marking of the article on the product. Reusable.