Ergonomic Teacher's Desk with Perforated Beam FrStP 4.14 for Comfortable Learning

The frame of the table consists of an all-welded construction. Side supports are L-shaped, consist of a metal pipe with a diameter of 40mm 1.2mm thick and a crosspiece made of 40x25mm profile pipe with a thickness of 1.5mm On the side supports in the area of the crosspiece is welded crossbar 40x25mm 1.5mm thick. In the rear part of the frame, two crossbeams made of metal flat-oval tube with a cross-section of 30x15mm and thickness of 1.5mm are welded to two pipe supports with a diameter of 40mm, and a perforated headboard made of metal sheet with a thickness of 1mm with round holes with a diameter of 5mm and a pitch of 12.1mm.

The legs of the table frame are fitted with an adjustable support with a swivel joint. It is designed for a pipe with a round cross-section with a diameter of 40 mm. It has a round base with a diameter of 80 mm.

The angle of inclination is up to 45°. All visible holes in the pipe are covered with plastic plugs. The frame is powder coated.

The cover is LDFP 22mm, has an ergonomic cutout and a hole for wires with a plastic plug.