Crown Drill 10mm for Expert II Intramedullary Pins - Precision Tool

Application: for the insertion of Expert II intramedullary pins. Manufactured from corrosion-resistant stainless steel. Cannulated version.

Internal diameter 2.7 mm. The total length is 190 mm, the length of the working part up to the stop is 131 mm, the diameter of the working part is 10 mm. At the end of the working part there are 8 right-hand teeth, inner hole diameter 6 mm, depth 65 mm with an open groove measuring 455 mm.

The diameter of the stop is 14 mm. The shank of the cutter, diameter 6 mm, has an end for a quick-release clamp type "AO". Laser marking of the diameter, individual marking.

Reusable.