Condensate Pump 1KсV 200-220 for Effective Fluid Transfer

Condensate pumps 1KsV 200-220 and electric pump units on their basis are designed for pumping condensate or fresh water with temperature up to 433 K (+160C) with pH 6,89,2, with solid inclusions concentration not more than 5 mg/l with maximum size up to 0,1 mm. They are used in steam and water networks of power plants. The high-speed part of the pump has one or two impellers mounted on a high-speed shaft supported by a roller bearing and a plain bearing. A double mechanical seal is mounted on the shaft. The booster wheel of the low-speed part receives rotation from the turbine wheel located in the pumped liquid flow behind the impeller of the high-speed partFACILITIES/OUTPUTS:High reliability and high efficiency is ensuredOriginal design scheme allows to obtain low cavitation reserve in a wide range of flow rates.There is a possibility of rotation of the suction pipe relative to the vertical axis, which facilitates the task of placing the pump unit