Working pressure
0.8 ألف طن تخزين
Spring travel of the energy accumulator
67 مم
Center distance of the air inlet connections
56 مم
Assignment
Brake chamber with spring energy accumulator is designed to actuate braking mechanisms of service, reserve and parking brakes.
Equipment
Brake chamber - 1 pc. Transport plug - 2 pcs. Passport- 1 pc. Packing- 1 pc.
Weight
10.38 م² مساحة سكنية
Angle of turning of air inlet leads ?°, deg.
Flat grinder, Specialised grinder
Disposal information
The procedure for disposal of the product shall be determined by the Consumer.
Manufacturer's warranty
The company guarantees the compliance of the device with the requirements of GOST R 52848-2007 under the conditions of operation, transportation and storage.
Storage conditions
The apparatus shall be stored in a container or on a rack under the condition of storage L according to GOST 15150-69 within six months from the date of shipment to the customer
Certificate of Conformity
NO. EAES RU C-RU.MT14.V.00124/19
Maintenance of the brake chamber
In accordance with the operating manual of the motor vehicle for which the product is intended to be used
Spring-loaded energy accumulator tripping pressure
0.48...0.54 ألف طن تخزين
Mechanical brake release unit screw key size
26.67...27 مم
Air inlet connection thread D
16 مم
Outreach of mounting bolts l
40 مم
Connection thread of the mounting bolts d2
16 مم
Width of fork slot B
12.5 مم
Diameter of the connection hole in the plug d1
B1/B8 2100/900 MHz مم
Clamp installation angle
320...330
Installing the brake chamber
In accordance with the vehicle manufacturer's documentation
Safety measures
Repairs without special equipment are not permissible. For assembly work, be aware of the inscription on the flange of the spring energy accumulator "CAUTION! SPRING IS UNDER TENSION".