Machine MT-3001 is designed for electric resistance spot welding of parts made of low-carbon steel, stainless steel 12X18H9T, titanium alloys 0T4, aluminium alloys, cross joints of reinforcing bars of AI, AII, ASH classes.
Parts intended for welding must be free of oxide films and contaminants preventing welding. The machine must be operated in closed rooms at an altitude of not more than 1000m above sea level at a cooling water temperature from plus 5°C to plus 25°C.
The machine is manufactured for power supply from two phases of three-phase supply network with isolated neutral of one of the voltages:
380 V at a frequency of 50 Hz;
380 V at 60 Hz
The machine is manufactured in the following version: - UHL4 - for operation in areas of temperate climate at ambient air temperature from plus 1°C to plus 35°C with relative humidity not exceeding 80% at temperature plus 25°C. The ambient air must not contain harmful gases destroying metals and paintwork. Ambient air must not contain harmful gases destroying metals, lacquer and paintwork...
أخبرنا بما تحتاجه واحصل على عروض أسعار من موردين موثوقين