المنتجات — الموصلات والطرفيات

Isolated Clamp C200 for Voltage Measurement and Grounding

مشبك معزول C200 لقياس الجهد والتأريض

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
Insulated Terminal CPTA R 95 for SIP Connection

طرف معزول CPTA R 95 لتوصيل SIP

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
Support Clamp for 4-Conductor SIP Line PSP16/120

مشبك دعم لخط SIP من 4 موصلات PSP16/120

SAR 5.63-22.50
ش.ذ.م.م داز 🇷🇺
Suspension Support Clamp PS 1500 for SIP-2 Fastening

مشبك دعم معلق PS 1500 لتثبيت SIP-2

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
Polyethylene Cap for Pin Insulators - K9

غطاء بولي ايثيلين للعوازل المدببة - K9

SAR 0.45-2.25
ش.ذ.م.م داز 🇷🇺
SIP-2 Suspension Support Clamp PS 1500R

مشبك دعم معلق SIP-2 PS 1500R

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
Intermediate Suspension Set for SIP-2 - ES 1500

مجموعة التعليق الوسيطة لـ SIP-2 - ES 1500

SAR 18-67.50
ش.ذ.م.م داز 🇷🇺
Isolated Terminal CPTA R 54.6 for SIP Connection

طرف معزول CPTA R 54.6 لتوصيل SIP

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
Isolated Terminal CPTA R 25 for SIP Connections

طرف معزول CPTA R 25 لتوصيلات SIP

SAR 1.13-6.75
ش.ذ.م.م داز 🇷🇺
PL 240 Piercing Clamp for Electrical Applications

مشبك ثاقب PL 240 للتطبيقات الكهربائية

SAR 33.75-135
ش.ذ.م.م داز 🇷🇺
Insulated Terminal Connector CPTA R 35

موصل طرف معزول CPTA R 35

SAR 1.13-6.75
ش.ذ.م.م داز 🇷🇺
Outdoor Lighting Network Terminal Block UPO-2

كتل التوصيل الخارجية للإضاءة UPO-2

SAR 5.63-22.50
ش.ذ.م.م داز 🇷🇺

انشر طلب الشراء الخاص بك

احصل على عروض من موردين موثوقين

وفر وقتك
Anchor-Supporting Clamp PAS216-435

مشبك دعم وتثبيت PAS216-435

SAR 3.38-13.50
ش.ذ.م.م داز 🇷🇺
MJРВ 4-16 Connection Clamp for SIP Wires

مشبك توصيل MJРВ 4-16 لأسلاك SIP

SAR 0.68-3.60
ش.ذ.م.م داز 🇷🇺

الأسئلة الشائعة

Can suppliers identify a connector from a photo or an old designation?
Usually yes. Much equipment operating in Asia, Africa and Latin America was built with Soviet and Russian connector series, and plants keep full archives of designations. Send a photo of the shell marking, pin layout and a measurement of the shell diameter; suppliers will match the series and propose the current production equivalent.
What minimum quantities apply to connectors and terminals?
Distribution stock items sell from tens of pieces, and terminal blocks by the carton. For series produced to order — special platings, explosion-proof shells — minimums of 50–200 pieces are typical. Repair organisations buying small mixed lots are normal customers here, not an exception.
What contact plating options are available?
Standard contacts come tinned or silver-plated; gold plating is available for low-signal and high-reliability applications. Plating type and thickness are stated in the datasheet, along with mating cycles and contact resistance. If your application involves corrosive atmosphere or rare mating, say so — the supplier will recommend plating accordingly.
Are explosion-proof connectors certified for hazardous zones?
Explosion-proof series carry Ex certification under EAEU technical regulations, with protection types and zone suitability marked on the shell and certificate. These documents are normally accepted for pre-qualification; verify with your local inspectorate whether EAEU Ex certificates suffice or local recognition is required for your installation class.
How do small interconnect orders ship internationally?
Connectors are dense, high-value cargo, so air courier is economical: a maintenance order of several kilograms reaches the Gulf or Central Asia in 5–10 days with full export paperwork. Larger production volumes consolidate into groupage sea or truck freight. Suppliers handle export documentation in both cases.