Angle Grinder
Electrostatic Precipitator
Drill guide
Spiral Classifier
Rotary Shredder
Axial Compensator
Drill Bit
Wire Feed Mechanism
Corrosion Inhibitor
Penetrant Spray
Drying Chamber
Axial Bellows Compensator
Gland Packing
Rack Jack
Rail Grinder
Rotary Device
Solid Carbide Drill
Telescopic Handler
Cast Iron Plate
Torik SI Measuring Sensors FDRS.408717.002TU TGMC Version
US$15-42
Temperature measurement error, °C:
0,5
Temperature measurement error, °C:
0,5
LLC "NPP "CHISTY INSTRUMENT" 🇷🇺
Tail Grip Quick Release Device TG-012 BriBase
US$90-300
Overall diameter:
140
Total height:
104.5
ARMORICA LLC 🇷🇺
TAIL GRIP Quick Release Device for Workpiece Clamping TG-018
US$90-300
Overall diameter:
140
Total height:
104.5
ARMORICA LLC 🇷🇺
TAIL GRIP Device for Quick Clamp, Model TG-040
US$90-300
Overall diameter:
140
Total height:
94.5
ARMORICA LLC 🇷🇺
Cast Mooring Cleats GOST 11264 for Marine Applications
US$3-60
Material:
Steel
Material:
Steel
MICRON-MARINE LLC 🇷🇺
Noise Suppressor APT-01(D) for Air, Gas, and Steam
US$900-6,000
Pipe diameter:
50...1000
Pressure in the pipeline upstream of the valve:
0.1...25
APT LLC 🇷🇺
Steam Release Noise Suppressor TYPE-01 (D)
US$900-3,600
Expenditure:
200
Design temperature:
480
PROMDetail LLC 🇷🇺
Spring Washers OСТ 1 11532-74, OСТ 1 11533-74
US$0.01-0.12
Material:
Steel 65G, bronze ??.????-1
Material:
Steel 65G, bronze ??.????-1
FIRST FASTENER PLANT LLC 🇷🇺
Spring Washers GOST 6402-70 for Bolts, Screws, and Studs
US$0.03-0.60
Size:
6-30
Material:
65?
MMK-METIZ OJSC 🇷🇺
Large PCB Heating Table NP 54-36 PRO /MEGA/ for Soldering
US$1,500-4,800
Dimensions of the heating zone:
365...540
Heater power:
6000
TECHNO-ALLIANCE ELECTRONICS LLC 🇷🇺
Thermostatic Table NP 6-5 PRO with Temperature Controller TP 1-10 0.5 for PCB Heating
US$210-600
Operating temperature of the thermostat:
50...350
Aluminum heater capacity:
175
TECHNO-ALLIANCE ELECTRONICS LLC 🇷🇺
Thermostatic Table NP 10-6 PRO with Temperature Regulator TP 1-10 0.5
US$210-600
Operating temperature of the thermostat:
50...350
Aluminum heater capacity:
350
TECHNO-ALLIANCE ELECTRONICS LLC 🇷🇺
Electric Collector LA 19-22-CET 155 800
US$1,500-4,800
Speed of EPS movement:
One link up to 16GB 64-bit DDR4-2400 MHz with ECC support; 16GB (for CPC1309-01); 8GB (for CPC1309-02)
Current draw during driving:
800
S ELECTROTANSPORT LLC 🇷🇺
Electric Current Collector LA 19-21-SET 155 800
US$3,000-9,600
Speed of EPS movement:
One link up to 16GB 64-bit DDR4-2400 MHz with ECC support; 16GB (for CPC1309-01); 8GB (for CPC1309-02)
Current draw during driving:
800
S ELECTROTANSPORT LLC 🇷🇺
Electric Current Collector TA 20-SET 160 1400
US$1,500-4,800
Assignment:
Yagry electrical apparatus designed to create electrical contact between the electrical equipment of rolling stock (EPS) and the contact network.
Assignment:
Yagry electrical apparatus designed to create electrical contact between the electrical equipment of rolling stock (EPS) and the contact network.
S ELECTROTANSPORT LLC 🇷🇺
Pallet Grab ZP-2.0-1000-1570 for Lifting and Moving Loads
US$150-480
Payload:
2
Payload:
2
SAMSON LLC 🇷🇺
Pallet Grab ZPr-3.0-1000 for Lifting and Moving Loads
US$900-3,000
Payload:
3
Payload:
3
SAMSON LLC 🇷🇺
Nitrogen Vacuum Trap LA-100 - Efficient Condensation Solution
US$450-1,800
Weight including plugs and parts of their fastening, kg, not more:
14.5
Conductivity at a pressure of 1.3x10 -2 Pa, l/s , not less than:
370 l/s
VACUUMASH OJSC 🇷🇺
Nitrogen Vacuum Trap LA-250
US$900-3,000
Conductivity at a pressure of 1.3x10 -2 Pa, l/s , not less than:
2300 l/s
Conductivity at a pressure of 1.3x10 -2 Pa, l/s , not less than:
2300 l/s
VACUUMASH OJSC 🇷🇺
Nitrogen Fill Vacuum Trap LA-160
US$900-3,000
Liquid nitrogen flow rate at pressure 6.6x10-3 Pa, l/h, no more than:
0,8 l/h
Liquid nitrogen flow rate at pressure 6.6x10-3 Pa, l/h, no more than:
0,8 l/h
VACUUMASH OJSC 🇷🇺
Non-Destructive Testing Measure OSO 32.008-09 №1
US$90-300
Hole diameter D1, D3:
4
Bore diameter D2, D4, D5, D6:
5
ALTEK-NAUKA LLC 🇷🇺
Non-Destructive Testing Measure No. 2 from Set OSO 32.008-09
US$90-300
Diameter ID1:
5
Diameter ID2:
5
ALTEK-NAUKA LLC 🇷🇺
Non-Destructive Testing Device OSO 32-006-2002
US$90-300
Diameter of artificial defect:
6±0,05
Height of measure:
59
ALTEK-NAUKA LLC 🇷🇺
Multifunctional Combined Machine "Chistik" MKM-1904-12
US$30,000-96,000
Motor power:
65
Payload:
2
LZMKM LLC 🇷🇺
Multifunctional Combined Machine with Attachments MKM-1903
US$15,000-48,000
Rated motor power (her):
89
Operating weight:
3720
SPECMASH LLC 🇷🇺
Multifunctional Combined Machine "Chistik" MKM-1904-22
US$42,000-150,000
Motor power:
65
Payload:
2
LZMKM LLC 🇷🇺
Multi-component Dosing Station SDM-8-4
US$1,500-5,400
Power consumption:
250
Power supply voltage:
220
SEMZ LLC 🇷🇺
Multi-Component Dosing Station SDM-7-4
US$1,500-5,400
Type of product according to PP RF 616:
Equipment for bakery products production
Type of product according to PP RF 616:
Equipment for bakery products production
SEMZ LLC 🇷🇺
Multi-component Dosing Station SDM-8-2
US$900-3,600
Power consumption:
250
Power supply voltage:
220
SEMZ LLC 🇷🇺
Modular Extractable Perforator PМI90-02
US$3,000-18,000
Length of one perforator section:
1403
Explosive weight:
Built-in memory card slot, support microSD/SDHC/SDXC card (up to 256GB); manual recording/alarm recording
RFNC-VNIIEF IM. ACADEM. E.I. ZABABAKHINA SUE 🇷🇺
Modular Extractable Perforator PМI90
US$3,000-18,000
Length of one perforator section:
843
Number of charges in one module:
9
RFNC-VNIIEF IM. ACADEM. E.I. ZABABAKHINA SUE 🇷🇺
Modular Extractable Perforator PМI48
US$900-3,600
Length of one perforator section:
623
Number of charges in one module:
6
RFNC-VNIIEF IM. ACADEM. E.I. ZABABAKHINA SUE 🇷🇺
Metal Processing Services Including Cutting, Bending, Welding, Painting, Assembly, and Machining
US$6-12,000
IRONCAT LLC 🇷🇺
HDZ Separator Partition 35mm Height L2000 CLM50D-RP-035-20
US$0.90-3.60
Length:
1956
Height:
55
IEK Holding LLC 🇷🇺
CLM50D-RP-085-30-HDZ Separator Partition 85mm Height L3000
US$1.50-4.80
Length:
2963
Height:
80
IEK Holding LLC 🇷🇺
CLM50D-RP-080-30 Divider Partition 80mm Height 3000mm Length IEK
US$1.50-4.80
Length:
2963
Height:
80
IEK Holding LLC 🇷🇺
Hydraulic Shears with Inclined Blade for Sheet Metal 12x3200mm Model NG12G.02
US$4,200-15,000
Cutting length:
3200
Thickness of the sheet to be cut:
B1/B8 2100/900 MHz
YUMZ LLC 🇷🇺
