Subsurface Anode Grounding System AZ.PTM with Conductive Polymer Element PAV.PTM.P1
US$90-360
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
PROMTEHMASTER LLC 🇷🇺
Deep Grounding Anode AZ.PTM with Magnetite Working Element Set GAZ.PTM.M.K
US$90-600
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
PROMTEHMASTER LLC 🇷🇺
AZ-TES Anode Grounding Systems with Carbon-Saturated Polymer Element, Subsurface
US$30-180
Width:
125
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
TECHENERGOSNAB LLC 🇷🇺
Mendeleevets-MTKG Deep Magnetite Anode Grounding Kit
US$90-360
Material of manufacture:
Magnetite
Material of manufacture:
Magnetite
CHIMSERVICE CJSC 🇷🇺
Mendeleevets-MM(23) Ferro-Silicon Subsurface Anode Grounding Rod
US$9-36
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
CHIMSERVICE CJSC 🇷🇺
Deep Anode Grounding System AZ.PTM with Titanium Oxide Coating
US$90-600
Material:
titanium coated with mixed metal oxides
Material:
titanium coated with mixed metal oxides
PROMTEHMASTER LLC 🇷🇺
Complete Polymer Anode Grounding System "Rainbow" (AZP-RA-K)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ANOD LLC 🇷🇺
Low-Soluble Deep Anode Grounding Rod "Mendeleevets"-MRG
US$300-1,800
Material of manufacture:
Chemical resistant material (titanium, niobium, tantalum) with MMO coating
Material of manufacture:
Chemical resistant material (titanium, niobium, tantalum) with MMO coating
CHIMSERVICE CJSC 🇷🇺
Mendeleevets-MKG Deep Anodic Ferrosilicon Grounding Kit
US$90-360
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
CHIMSERVICE CJSC 🇷🇺
Deep Anode Grounding System AZ.PTM with Titanium Working Element
US$150-540
Length:
1800
Material:
Mixed metal oxide coated titanium complete
PROMTEHMASTER LLC 🇷🇺
Subsurface Anode Grounding Rod AZ-TES with Titanium Electrode and MMO Coating, 25mm Diameter
US$30-120
Diameter:
25
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
TECHENERGOSNAB LLC 🇷🇺
Polymer Anode Grounding System "Rainbow" AZP-RA
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ANOD LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Save Your Time
Ferro-silicon Anode Grounding Electrode AZ.SK.FS
US$90-300
Length:
1455...1510
Material:
Electrically conductive sheet material
SOYUZKOMPLEKT LLC 🇷🇺
Mendeleevets-MTG Deep Magnetite Anode Grounding Electrode
US$90-360
Type:
Magnetite deep anodic earthing electrode
Type:
Magnetite deep anodic earthing electrode
CHIMSERVICE CJSC 🇷🇺
Rainbow Polymer Anode Grounding Rod (AZP-RA-G)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ANOD LLC 🇷🇺
Mendeleevets-MK(23) Subsurface Ferrisilicon Anode Grounding System
US$90-300
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
CHIMSERVICE CJSC 🇷🇺
AZ-TES Anode Grounding Electrodes with Ferro-Silicon Working Electrode
US$30-120
Section:
65
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
TECHENERGOSNAB LLC 🇷🇺
Ferro-silicon Surface Anode Grounding Type PAZ.PTM.F
US$9-36
Working element length:
1300
Material:
Ferrosilide: cast iron grade CS15
PROMTEHMASTER LLC 🇷🇺
Mendeleevets-MM(43) Subsurface Ferro-Silicon Anode Grounding Electrode
US$9-36
Nominal electrode weight:
43
Material of manufacture:
ferrosilide
CHIMSERVICE CJSC 🇷🇺
Mendeleevets-MGB Deep Block Ferro-silicon Anode Grounding Rod
US$90-360
Material of manufacture:
Ferrosilide of CS 15 grade according to GOST 7769
Material of manufacture:
Ferrosilide of CS 15 grade according to GOST 7769
CHIMSERVICE CJSC 🇷🇺
Ferro-silicon Anode Grounding System "Rainbow" (AZF-RA)
US$9-36
Rated current load per operating element:
1,6; 2,0; 3,0
Maximum current load per workcell:
3,9; 5,0; 8,0
ANOD LLC 🇷🇺
Polymer Anode Grounding System AZP.PTM.G.K. for Deep Grounding
US$90-360
Material of the working element:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material of the working element:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
PROMTEHMASTER LLC 🇷🇺
Rainbow Type Polymer Anode Grounding Device (AZP-RA-U)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ANOD LLC 🇷🇺
Deep Ferro-Silicon Anode Grounding Electrode "Mendeleevets"-MG
US$150-480
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
CHIMSERVICE CJSC 🇷🇺
Ferrosilicon Anode Grounding System AZF.PTM.G.K
US$150-480
Material of the working element:
Ferrosilide: cast iron grade CS15
Material of the working element:
Ferrosilide: cast iron grade CS15
PROMTEHMASTER LLC 🇷🇺
Polymer Anode Grounding Electrode for Surface Grounding Type AZP.PTM.P
US$9-60
Material:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
PROMTEHMASTER LLC 🇷🇺
Complete Anode Grounding Systems AZ "Delan
US$300-1,800
Weight:
42
Service life, at least:
30
DELAN OJSC 🇷🇺
Bipron Grounding Electrode 60.3mm/70mm Stainless Steel
US$30-180
Design options:
Horizontal
The standard length of the electrode produced by the manufacturer is as follows:
1...6
BIPRON LLC 🇷🇺
Subsurface Magnetite Anode Grounding Rod "Mendeleevets"-MTP
US$90-300
Material of manufacture:
Magnetite
Material of manufacture:
Magnetite
CHIMSERVICE CJSC 🇷🇺
Ferrosilicon Anode Grounding Electrode for Surface Grounding AZF.PTM.P
US$9-36
Length:
1300
Material:
Ferrosilide: cast iron grade CS15
PROMTEHMASTER LLC 🇷🇺
Deep Anode Grounding Electrode FerroSilicon GAZ.PTM.F
US$90-300
Working element length:
1300
Material:
Ferrosilide: cast iron grade CS15
PROMTEHMASTER LLC 🇷🇺
Polymer Anode Grounding System for Surface Grounding AZP.PTM.P.K
US$90-360
Material of manufacture:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material of manufacture:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
PROMTEHMASTER LLC 🇷🇺
Deep Anode Grounding Electrode AZ.PTM with Magnetite Element GAZ.PTM.M
US$90-360
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
PROMTEHMASTER LLC 🇷🇺
Cross-Section Deep Anode Grounding Electrodes AZ-TES
US$90-300
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
Service life, at least:
30 years
TECHENERGOSNAB LLC 🇷🇺
Rainbow Polymer Anode Grounding Electrode, Deep Sectional (AZP-RA-GS)
US$90-300
Maximum current load:
5,0
Number of electrodes per section:
4
ANOD LLC 🇷🇺
Polymer Anode Grounding System "Rainbow", Sectional Surface Type (AZP-RA-PS)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ANOD LLC 🇷🇺
Anode Electrode ER-6 T2US 25 90
US$1.20-6
Nominal core cross-section:
25
Material:
heat resistant with double layer coating
DONKABEL LLC 🇷🇺
Subsurface Anode Grounding System AZ.PTM with Conductive Polymer Element PZ.PT
US$30-180
Material:
The working element of AZ made of carbon plastic (P) is a composition of graphite and thermosetting resin. The mass fraction of graphite should be at least 80%.
Material:
The working element of AZ made of carbon plastic (P) is a composition of graphite and thermosetting resin. The mass fraction of graphite should be at least 80%.
PROMTEHMASTER LLC 🇷🇺
Ferronickel Anode Grounding Electrode for Deep Grounding AЗФ.ПТМ.Г
US$90-360
Type:
Anodic earthing electrode type AZF.PTM.G
Type:
Anodic earthing electrode type AZF.PTM.G
PROMTEHMASTER LLC 🇷🇺
Deep Anode Grounding Rods AZ-TS with Titanium MMO Coating, 25mm Diameter
US$90-300
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
Service life, at least:
30 years
TECHENERGOSNAB LLC 🇷🇺
Subsurface Anode Grounding System AZ.PTM with Ferroalloy Element PAZ.PTM.F.K
US$90-360
Length:
1500
Material:
Ferrosilide: cast iron grade CS15
PROMTEHMASTER LLC 🇷🇺
Ferro-silicon Grounding Anode Electrode AZ.SK.FS-GB-1500
US$90-300
Electrode length (working element):
1500
Rated current load on the earthing switch:
2.3
SOYUZKOMPLEKT LLC 🇷🇺
Polymer Anode Grounding Electrode for Deep Grounding AЗП.ПТМ.Г
US$90-360
Type:
Anodic earthing electrode polymer type AZP.PTM.G
Type:
Anodic earthing electrode polymer type AZP.PTM.G
PROMTEHMASTER LLC 🇷🇺
Depth Anode Grounding System AZ.PTM with Conductive Polymer Element GAZ.PTM
US$90-360
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
PROMTEHMASTER LLC 🇷🇺
ER-6 T 10 36 Electrode for Cathodic Protection Systems
US$30-180
Nominal core cross-section:
10
Nominal outer diameter of the module wire:
NZ-150-14,5
DONKABEL LLC 🇷🇺
Deep Anode Grounding Electrode ELGAZ-5-GAS
US$90-600
Material of working and current-carrying shells:
Elastomer
Climatic version during operation:
B5 (for water)
ENERGOFINSTROY LLC 🇷🇺
